Axial scx10 ii Rear Bumper | Time-Lapse | Anet A8 | 3D Print Lab
Welcome to 3D Print Lab, it's all about time-lapse recording. The models are printed on the Anet A8! I hope you enjoy them! Some are lengthy and some are short, either way, I try to capture the beauty of 3D Printing. Thanks for watching and leave a Like and comment for suggestions to print next! Anet A8 Plus: https://shop.anet3d.com/products/anet-a8-plus Check out the New Anet ET4: https://shop.anet3d.com/products/et4-3d-printer This is a slim version of the original bumper for the Jeep Cherokee 2000 with slight modification and no option for lights. There are a few designs for the rear bumper but quite what I was looking for so here's my slimmer version of a rear bumper. Helps with your clearance when crawling Grab the STL here: https://www.thingiverse.com/thing:4284570 Print Setting CURA 4.5.0 PLA 1.75 Layer Height: 0.2 Wall Thickness: 1.2 Top and Bottom Thickness: 1.2 Infill Density: 20% Infill Pattern: Grid Print Temperature: 200 C Build Plate Tem: 60C Print Speed: 65 Infill Speed: 45 Wall Speed: 37 Inner Wall Speed: 37 Top/Bottom Speed: 35 Travel Speed: 150 Initial Layer Speed: 45 Build Plate Adhesion: Skirt 3mm No Support Ehrling - Typhoon [FREE TO USE] Free Download: https://soundcloud.com/ehrling/ehrling-typhoon Tags: #3dprinting #timelapse #3dprinter #3dprint #3dprinted #3dprints #octopi #timelapse #3dprintingtimelapse #satisfyingvideos #thingiverse #fusion360 #makerbot #creality #cr10 #ender3 #AnetA8 #AnetA6 #cura #satisfying
Welcome to 3D Print Lab, it's all about time-lapse recording. The models are printed on the Anet A8! I hope you enjoy them! Some are lengthy and some are short, either way, I try to capture the beauty of 3D Printing. Thanks for watching and leave a Like and comment for suggestions to print next! Anet A8 Plus: https://shop.anet3d.com/products/anet-a8-plus Check out the New Anet ET4: https://shop.anet3d.com/products/et4-3d-printer This is a slim version of the original bumper for the Jeep Cherokee 2000 with slight modification and no option for lights. There are a few designs for the rear bumper but quite what I was looking for so here's my slimmer version of a rear bumper. Helps with your clearance when crawling Grab the STL here: https://www.thingiverse.com/thing:4284570 Print Setting CURA 4.5.0 PLA 1.75 Layer Height: 0.2 Wall Thickness: 1.2 Top and Bottom Thickness: 1.2 Infill Density: 20% Infill Pattern: Grid Print Temperature: 200 C Build Plate Tem: 60C Print Speed: 65 Infill Speed: 45 Wall Speed: 37 Inner Wall Speed: 37 Top/Bottom Speed: 35 Travel Speed: 150 Initial Layer Speed: 45 Build Plate Adhesion: Skirt 3mm No Support Ehrling - Typhoon [FREE TO USE] Free Download: https://soundcloud.com/ehrling/ehrling-typhoon Tags: #3dprinting #timelapse #3dprinter #3dprint #3dprinted #3dprints #octopi #timelapse #3dprintingtimelapse #satisfyingvideos #thingiverse #fusion360 #makerbot #creality #cr10 #ender3 #AnetA8 #AnetA6 #cura #satisfying