FC TOPCUT2016 Self-weeding transfer paper for light fabrics
FC TOPCUT2016 SELF-WEEDING TRANSFER PAPER FOR LETTERING AND DESIGNS ON LIGHT COLORED FABRICS SUITABLE FOR COLOR LASER PRINTERS AND COPIERS Decorate a white T-shirt WITHOUT LEAVING BACKGROUNDS The box contains: instructions 1 white polyester cloth 2 sheets of heat resistant tissue paper AU CFC VELIN 10 sheets of AU CFC POLSIL plastified silicon paper 100 printable sheets Insert a sheet of FC TOPCUT2016 in the laser printer. Pay attention to the printing side. TOPCUT2016 is ideal for full color images and without gradients or shades. This image was made with strong colors. The slight gradient on the bottom shows the transfer's performance on images with shades. Set the printer to extra heavy paper (121-188 gr/m2). Printed in mirror mode with an OKI CMYK printer. Pre-heat the press to 175°C (only for the first t-shirt) Place the t-shirt on the press Place the transfer paper Protect with 1 layer of white polyester cloth included in the packet Press at 175°C for 20-25" with medium-high pressure Remove the polyester cloth Wait 5" and peel off the transfer's liner Only the portions with toner will be transferred Place a sheet of AU CFC POLSIL, plastified silicon paper on the image, with the glossy side facing the graphics Press at 175°C for 35" with very high pressure. Important for washing resistance. Remove the plastified silicon paper Full color graphics will be perfectly outlined The very light shaded colored parts remain on the paper For best results in case of light colors use the TOPWEED “topcolor6410” color palette (no cut technology) supplied with the CMYK printer or the TOPWEED transfer. The colors for the graphics can be chosen from the “topcolor6410” color palette A large range of colors are available and results are ALWAYS perfect! Printed on an OKI CMYK printer in mirror mode Pre-heat the press at 175°C (only for the first t-shirt) Place the t-shirt on the press Place the transfer paper Protect with 1 layer of white polyester cloth included in the packet Press at 175°C for 20-25" with medium-high pressure Remove the polyester cloth Wait 5" and peel off the transfer's liner Only the portions with toner will be transferred Place a sheet of AU CFC POLSIL, plastified silicon paper on the image With the glossy side facing the graphics Press at 175°C for 35" with very high pressure. Important for best washing resistance. Remove the plastified silicon paper Full color graphics will be perfectly outlined All colors, including the lightest will be perfect! Topweed, all self weeding colors in a single click!
FC TOPCUT2016 SELF-WEEDING TRANSFER PAPER FOR LETTERING AND DESIGNS ON LIGHT COLORED FABRICS SUITABLE FOR COLOR LASER PRINTERS AND COPIERS Decorate a white T-shirt WITHOUT LEAVING BACKGROUNDS The box contains: instructions 1 white polyester cloth 2 sheets of heat resistant tissue paper AU CFC VELIN 10 sheets of AU CFC POLSIL plastified silicon paper 100 printable sheets Insert a sheet of FC TOPCUT2016 in the laser printer. Pay attention to the printing side. TOPCUT2016 is ideal for full color images and without gradients or shades. This image was made with strong colors. The slight gradient on the bottom shows the transfer's performance on images with shades. Set the printer to extra heavy paper (121-188 gr/m2). Printed in mirror mode with an OKI CMYK printer. Pre-heat the press to 175°C (only for the first t-shirt) Place the t-shirt on the press Place the transfer paper Protect with 1 layer of white polyester cloth included in the packet Press at 175°C for 20-25" with medium-high pressure Remove the polyester cloth Wait 5" and peel off the transfer's liner Only the portions with toner will be transferred Place a sheet of AU CFC POLSIL, plastified silicon paper on the image, with the glossy side facing the graphics Press at 175°C for 35" with very high pressure. Important for washing resistance. Remove the plastified silicon paper Full color graphics will be perfectly outlined The very light shaded colored parts remain on the paper For best results in case of light colors use the TOPWEED “topcolor6410” color palette (no cut technology) supplied with the CMYK printer or the TOPWEED transfer. The colors for the graphics can be chosen from the “topcolor6410” color palette A large range of colors are available and results are ALWAYS perfect! Printed on an OKI CMYK printer in mirror mode Pre-heat the press at 175°C (only for the first t-shirt) Place the t-shirt on the press Place the transfer paper Protect with 1 layer of white polyester cloth included in the packet Press at 175°C for 20-25" with medium-high pressure Remove the polyester cloth Wait 5" and peel off the transfer's liner Only the portions with toner will be transferred Place a sheet of AU CFC POLSIL, plastified silicon paper on the image With the glossy side facing the graphics Press at 175°C for 35" with very high pressure. Important for best washing resistance. Remove the plastified silicon paper Full color graphics will be perfectly outlined All colors, including the lightest will be perfect! Topweed, all self weeding colors in a single click!