DHCP Server Configuration on Routers | Configuring the Cisco IOS DHCP Server
https://www.expertnetworkconsultant.com/configuring/how-to-configure-a-dhcp-server-on-a-hypervisor-as-an-ip-helper-on-a-layer-3-switch-for-a-number-of-vlans/ In this video, Samuel takes you through designing and configuring DHCP on a network. IP Helper-Address is explained well and the examples helpful to get you on your way. ==================================================================================== Before You Begin ==================================================================================== Before you configure the DHCP address pool, you must: Identify DHCP options for devices where necessary, including the following: Default boot image name Default devices Domain Name System (DNS) servers Network Basic Input/Output System (NetBIOS) name server Primary subnet Secondary subnets and subnet-specific default device lists Decide on a NetBIOS node type (b, p, m, or h). Decide on a DNS domain name. ===================================================================================== Step 1 enable ===================================================================================== Example: Device | enable Enables privileged EXEC mode. Enter your password if prompted. ===================================================================================== Step 2 configure terminal ===================================================================================== Example: Devic # configure terminal Enters global configuration mode. ===================================================================================== Step 3 ip dhcp excluded-address low-address [high-address] ===================================================================================== ip dhcp excluded-address 172.16.1.1 172.16.1.50 ip dhcp excluded-address 172.16.2.1 172.16.2.100 ip dhcp pool Subnet-1610 network 172.16.1.0 255.255.255.0 next-server 172.16.1.10 dns-server 172.16.1.20 default-router 172.16.1.1 domain-name subnetone.com lease 0 20 30 ip dhcp pool Subnet-1620 network 172.16.2.0 255.255.255.0 next-server 172.16.1.10 dns-server 172.16.1.20 default-router 172.16.2.1 lease 1 5 7 R1# This video on Configuring the Cisco IOS DHCP Server was found here: https://youtu.be/X_H267HmnrU
https://www.expertnetworkconsultant.com/configuring/how-to-configure-a-dhcp-server-on-a-hypervisor-as-an-ip-helper-on-a-layer-3-switch-for-a-number-of-vlans/ In this video, Samuel takes you through designing and configuring DHCP on a network. IP Helper-Address is explained well and the examples helpful to get you on your way. ==================================================================================== Before You Begin ==================================================================================== Before you configure the DHCP address pool, you must: Identify DHCP options for devices where necessary, including the following: Default boot image name Default devices Domain Name System (DNS) servers Network Basic Input/Output System (NetBIOS) name server Primary subnet Secondary subnets and subnet-specific default device lists Decide on a NetBIOS node type (b, p, m, or h). Decide on a DNS domain name. ===================================================================================== Step 1 enable ===================================================================================== Example: Device | enable Enables privileged EXEC mode. Enter your password if prompted. ===================================================================================== Step 2 configure terminal ===================================================================================== Example: Devic # configure terminal Enters global configuration mode. ===================================================================================== Step 3 ip dhcp excluded-address low-address [high-address] ===================================================================================== ip dhcp excluded-address 172.16.1.1 172.16.1.50 ip dhcp excluded-address 172.16.2.1 172.16.2.100 ip dhcp pool Subnet-1610 network 172.16.1.0 255.255.255.0 next-server 172.16.1.10 dns-server 172.16.1.20 default-router 172.16.1.1 domain-name subnetone.com lease 0 20 30 ip dhcp pool Subnet-1620 network 172.16.2.0 255.255.255.0 next-server 172.16.1.10 dns-server 172.16.1.20 default-router 172.16.2.1 lease 1 5 7 R1# This video on Configuring the Cisco IOS DHCP Server was found here: https://youtu.be/X_H267HmnrU