Epiphone Les Paul Special II Goth Edition Modification Project Part 2/2 featuring Guitar Madness
Epiphone Les Les Paul Special II Goth Edition Modification Project, final version… well, maybe... It mainly features Guitar Madness Dirty Digits on bridge position and Guitar Madness P-94 on the neck position. This is a conclusion of a previous video, Epiphone Les Paul Special II Goth Edition Modification Project Part ½. The link is on the video. Jump to the following if you wish: Original version of the guitar, go to 00:07 Mod’ed version of the guitar, go to 01:20 Original on left channel + Mod’ed on right channel for real time comparison, go to 02:29 A semi-final mixdown of the track with my personal tone settings (Bogner Uberschall on left and Mesa/Boogie Dual Rectifier Modern on right) starts at 03:43 The guitar is still using the original tuners, switch, output jack and plate. For a guitar that I only spent less than around $140 for used guitar + parts, the turnout is great! I use a Dragonheart pick! They are so awesome! Modifications are: From Guitar Madness: https://www.ebay.com/usr/guitarmadnessguitarmadness GM Dirty Digits bridge humbucker which is similar to Gibson’s Dirty Fingers Magnet: Ceramic Large Center Magnet with 2 Helper Magnets Black Double Screw Bobbins Chrome Filister Pole Screws (also available in gold) Neck : 10.5k with 43 ga wire Bridge : 17k with 44 ga. wire Sold as a set, neck and bridge, inquire from seller if you just need the bridge GM P-94 Style Humbucker sized P-90 neck pickups chrome/black P-94 Style Chrome / Black Covers (also available in chrome) Single conductor wire, with bare shield--- Resistance: Neck:7.1k ohms, Bridge:7.9k ohms 50mm neck, 52mm bridge string spacing Ceramic Magnets (also available in Alnico) The guitar has no tone circuit. Both pickups go to the following volume pots below, then to the pickup selector switch, then straight to the output jack. From Guitar Fetish: http://www.guitarfetish.com XGP Custom Taper Split Shaft Pot 1M- "No Load" for bridge pickup: https://www.guitarfetish.com/XGP-Custom-Taper-Split-Shaft-Pot-1M-No-Load-Our-Best-_p_22994.html XGP Custom Taper Split Shaft Pot A500K- Humbucker Volume: https://www.guitarfetish.com/XGP-Custom-Taper-Split-Shaft-Pot-A500K-Humbucker-Volume-Our-Best-_p_22992.html Roller Bridge Black Tuneomatic: https://www.guitarfetish.com/Roller-Bridge-Black-to-fit-les-paul-tuneomatic_p_660.html Feel free to make a comment and ask a question below! Please like and subscribe! Or you can join in the discussions about this guitar at the following forums: guitarforums.com: http://www.guitarforums.com/showthread.php?t=47695 epiphonetalk.com: http://www.epiphonetalk.com/threads/epiphone-les-paul-special-ii-goth-mod-project-log.3076/ Thank you for viewing! DAW: Magix Music Maker Final version of track used: On Soundcloud - https://soundcloud.com/littlebadboy/drop On Soundclick - https://soundclick.com/share.cfm?id=13747746
Epiphone Les Les Paul Special II Goth Edition Modification Project, final version… well, maybe... It mainly features Guitar Madness Dirty Digits on bridge position and Guitar Madness P-94 on the neck position. This is a conclusion of a previous video, Epiphone Les Paul Special II Goth Edition Modification Project Part ½. The link is on the video. Jump to the following if you wish: Original version of the guitar, go to 00:07 Mod’ed version of the guitar, go to 01:20 Original on left channel + Mod’ed on right channel for real time comparison, go to 02:29 A semi-final mixdown of the track with my personal tone settings (Bogner Uberschall on left and Mesa/Boogie Dual Rectifier Modern on right) starts at 03:43 The guitar is still using the original tuners, switch, output jack and plate. For a guitar that I only spent less than around $140 for used guitar + parts, the turnout is great! I use a Dragonheart pick! They are so awesome! Modifications are: From Guitar Madness: https://www.ebay.com/usr/guitarmadnessguitarmadness GM Dirty Digits bridge humbucker which is similar to Gibson’s Dirty Fingers Magnet: Ceramic Large Center Magnet with 2 Helper Magnets Black Double Screw Bobbins Chrome Filister Pole Screws (also available in gold) Neck : 10.5k with 43 ga wire Bridge : 17k with 44 ga. wire Sold as a set, neck and bridge, inquire from seller if you just need the bridge GM P-94 Style Humbucker sized P-90 neck pickups chrome/black P-94 Style Chrome / Black Covers (also available in chrome) Single conductor wire, with bare shield--- Resistance: Neck:7.1k ohms, Bridge:7.9k ohms 50mm neck, 52mm bridge string spacing Ceramic Magnets (also available in Alnico) The guitar has no tone circuit. Both pickups go to the following volume pots below, then to the pickup selector switch, then straight to the output jack. From Guitar Fetish: http://www.guitarfetish.com XGP Custom Taper Split Shaft Pot 1M- "No Load" for bridge pickup: https://www.guitarfetish.com/XGP-Custom-Taper-Split-Shaft-Pot-1M-No-Load-Our-Best-_p_22994.html XGP Custom Taper Split Shaft Pot A500K- Humbucker Volume: https://www.guitarfetish.com/XGP-Custom-Taper-Split-Shaft-Pot-A500K-Humbucker-Volume-Our-Best-_p_22992.html Roller Bridge Black Tuneomatic: https://www.guitarfetish.com/Roller-Bridge-Black-to-fit-les-paul-tuneomatic_p_660.html Feel free to make a comment and ask a question below! Please like and subscribe! Or you can join in the discussions about this guitar at the following forums: guitarforums.com: http://www.guitarforums.com/showthread.php?t=47695 epiphonetalk.com: http://www.epiphonetalk.com/threads/epiphone-les-paul-special-ii-goth-mod-project-log.3076/ Thank you for viewing! DAW: Magix Music Maker Final version of track used: On Soundcloud - https://soundcloud.com/littlebadboy/drop On Soundclick - https://soundclick.com/share.cfm?id=13747746