Anycubic Kobra Max blue shroud removal

Here I changed the nozzle from the .8mm to a .6mm. Super easy to remove the blue plastic shroud, 4 bolts, be careful when pulling the shroud off the wires are short and if they are like mine they are superglued in so not the easiest to remove or move off to the side. Then it was easy to remove the nozzle, heat to 240c be careful of the nozzle to remove the silicone sock (best to do it while it’s cool), use some tools to gently pull the sock off. Use some pliers to hold the heater block still and be mindful of the wires. Let me know if you have any questions