Voxelab Aquila (Ender 3 clone) Klipper test print
This is start of tuning Klipper softvare on printer (day 2 after install) Printer specs: Voxelab Aquila BLV Ender 3 linear rail kit cheap inducive probe for bed leveling 5015 cooling part fan, quiet 4010 fans, everything else is stock. BMG dual drive clone extruder driver voltages:0,8V, extruder 0.6V Software: Klipper with Mainsail os. Raspberry Pi 3A+ cheap inducive probe for bed leveling Printing Parameters: travel moves: 280 mm/s max_accel: 12000 square_corner_velocity: 15.0 infill speed: 120 mm/s inner perimeters: 120 mm/s outer perimeters: 100 mm/s pressure_advance: off (extruder sounds weird at those speeds) PETG 220/75 celsius Music: https://freemusicarchive.org Rhanee - Catch The Sun
This is start of tuning Klipper softvare on printer (day 2 after install) Printer specs: Voxelab Aquila BLV Ender 3 linear rail kit cheap inducive probe for bed leveling 5015 cooling part fan, quiet 4010 fans, everything else is stock. BMG dual drive clone extruder driver voltages:0,8V, extruder 0.6V Software: Klipper with Mainsail os. Raspberry Pi 3A+ cheap inducive probe for bed leveling Printing Parameters: travel moves: 280 mm/s max_accel: 12000 square_corner_velocity: 15.0 infill speed: 120 mm/s inner perimeters: 120 mm/s outer perimeters: 100 mm/s pressure_advance: off (extruder sounds weird at those speeds) PETG 220/75 celsius Music: https://freemusicarchive.org Rhanee - Catch The Sun