Hercules - QIDI X-Plus X-Max Carriage for BMG & Dragon / E3D V6
Hercules is a sturdy and dimensionally accurate one-piece carriage for the QIDI X-Plus and X-Max that was designed focusing on strength and ease of maintenance while keeping it lightweight. It uses self-securing cable management that doesn't require any cable ties. The PCB snaps in place and is moved to the side so it's not in the way of extruder access. The whole carriage is only roughly 95 g depending on infill and filament type used and the extruder and hotend are easily accessible without removing any other parts, although removing the blower fan attached with a single screw is recommended. Once the carriage is installed, there is no play between the bearings and the carriage. Hercules is using the popular dual gear BMG extruder and Dragon or V6 hotend. Download and more info here: https://www.thingiverse.com/thing:4780615
Hercules is a sturdy and dimensionally accurate one-piece carriage for the QIDI X-Plus and X-Max that was designed focusing on strength and ease of maintenance while keeping it lightweight. It uses self-securing cable management that doesn't require any cable ties. The PCB snaps in place and is moved to the side so it's not in the way of extruder access. The whole carriage is only roughly 95 g depending on infill and filament type used and the extruder and hotend are easily accessible without removing any other parts, although removing the blower fan attached with a single screw is recommended. Once the carriage is installed, there is no play between the bearings and the carriage. Hercules is using the popular dual gear BMG extruder and Dragon or V6 hotend. Download and more info here: https://www.thingiverse.com/thing:4780615