APN Setting | Unlocked Telstra 4G USB Modem ZTE MF823
--- Watch The Right | Choose the right -- ---Choose the right one suitable for your use--- Sim Starter Pack below AUD1.00 per GB: https://rover.ebay.com/rover/1/705-53470-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fsch%2Fmobileglobalau%2Fm.html%3Fitem%3D153081162642%26hash%3Ditem23a4592b92%253Ag%253Az6MAAOSwqfZaesAu%253Ark%253A1%253Apf%253A1%26frceupt%3Dtrue%26rt%3Dnc%26_trksid%3Dp2047675.l2562&campid=5338423940&toolid=20008 Depending on sim provider, you may or may not need to do Access Name Point setting. So if network signal caught already, but you cannot connect to internet, please do APN setting according to this instruction. Please do disconnect all other internet connections on your computer before setting. MF823 1.Plug USB modem, software install will start automatically. 2. After software install finished, open dashboard you just installed 3. At mebu bar, click " settings" 4. Click "APN" on left navigation menu, then click "Add new" on right 5. Fill in any words in " profile name" 6.APN: fill in the APN of your carrier. Leave others as default 7. Click "apply" 8. Choose the profile you just set from "profile" drop down menu. Then click "apply"
--- Watch The Right | Choose the right -- ---Choose the right one suitable for your use--- Sim Starter Pack below AUD1.00 per GB: https://rover.ebay.com/rover/1/705-53470-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fsch%2Fmobileglobalau%2Fm.html%3Fitem%3D153081162642%26hash%3Ditem23a4592b92%253Ag%253Az6MAAOSwqfZaesAu%253Ark%253A1%253Apf%253A1%26frceupt%3Dtrue%26rt%3Dnc%26_trksid%3Dp2047675.l2562&campid=5338423940&toolid=20008 Depending on sim provider, you may or may not need to do Access Name Point setting. So if network signal caught already, but you cannot connect to internet, please do APN setting according to this instruction. Please do disconnect all other internet connections on your computer before setting. MF823 1.Plug USB modem, software install will start automatically. 2. After software install finished, open dashboard you just installed 3. At mebu bar, click " settings" 4. Click "APN" on left navigation menu, then click "Add new" on right 5. Fill in any words in " profile name" 6.APN: fill in the APN of your carrier. Leave others as default 7. Click "apply" 8. Choose the profile you just set from "profile" drop down menu. Then click "apply"