Connect a USB HP Printer Using a Full Feature Driver in Windows | HP
Learn how to connect and install an HP printer using a USB connection and a full feature driver in Windows. For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport. More support options for your printer are available at http://hp.com/support. Continue the Conversation: http://hp.care/SupportForums http://hp.care/FacebookSupport http://hp.care/TwitterSupport Follow these steps to connect and install an HP printer using a USB connection and a full feature driver in Windows: - Do not connect a USB cable until prompted in the installation. - If you previously connected a USB cable, disconnect it. - Download the full feature driver for your printer at support.hp.com/drivers, and then open the file to extract the software. - If a Windows prompt displays, select Continue, Run, or Yes to allow changes to your computer. - With your printer powered on, select Continue. - Review the recommended software selections and if desired, customize your installation, and then select Next. - Review the license agreements and settings. - To adjust additional settings for the printer installation, select the corresponding blue header. - Select the check box to agree to the terms, and then select Next. - The printer driver and selected software install. - If prompted, select Manual Setup, and then select Next. - On the connection type screen, select USB, and then select Next. - When prompted, connect the square end of a USB cable to the printer, and the flat end to an available USB port on your computer. - The connection is detected, and the driver setup completes. - The remaining screens might differ depending on your printer. - Read and respond to the prompts to complete the printer installation. This video was produced by HP.
Learn how to connect and install an HP printer using a USB connection and a full feature driver in Windows. For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport. More support options for your printer are available at http://hp.com/support. Continue the Conversation: http://hp.care/SupportForums http://hp.care/FacebookSupport http://hp.care/TwitterSupport Follow these steps to connect and install an HP printer using a USB connection and a full feature driver in Windows: - Do not connect a USB cable until prompted in the installation. - If you previously connected a USB cable, disconnect it. - Download the full feature driver for your printer at support.hp.com/drivers, and then open the file to extract the software. - If a Windows prompt displays, select Continue, Run, or Yes to allow changes to your computer. - With your printer powered on, select Continue. - Review the recommended software selections and if desired, customize your installation, and then select Next. - Review the license agreements and settings. - To adjust additional settings for the printer installation, select the corresponding blue header. - Select the check box to agree to the terms, and then select Next. - The printer driver and selected software install. - If prompted, select Manual Setup, and then select Next. - On the connection type screen, select USB, and then select Next. - When prompted, connect the square end of a USB cable to the printer, and the flat end to an available USB port on your computer. - The connection is detected, and the driver setup completes. - The remaining screens might differ depending on your printer. - Read and respond to the prompts to complete the printer installation. This video was produced by HP.