NAT with PAT (Port Address Translation) Configuration in Cisco Packet Tracer with Source Command

Command: For Router 2: exit ip route 0.0.0.0 0.0.0.0 fa1/0 For Route3: exit ip route 0.0.0.0 0.0.0.0 fa0/0 For router 2: access-list 1 permit 192.168.1.0 0.0.0.255 ip nat pool test 60.0.0.1 60.0.0.50 netmask 255.0.0.0 ip nat inside source list 1 pool test overload interface fa0/0 ip nat inside interface fa1/0 ip nat outside