Dandelion chip original on Canon cameras with an EF first-generation bayonet mount.
Buy here: https://www.ebay.com/str/andreykuryanov For direct purchase write me: kuryanchik@gmail.com Direct price 10% lower than on Ebay. Hello, friends. In this video, I will show you how to install a plug in the Canon camera bayonet with the first-generation EF mount, so that the camera sees a dandelion chip and can work with it. 1. Look here. At this point there is a lens indicator lever. If you attach a Canon lens to the camera, this lever moves the petal of the lens mount and clamps the contact inside the Canon camera mount. 2. On adapters for manual lenses, this petal is shorter than necessary. Therefore, the lever inside the camera mount does not pinch the contact. 3.In order for the lever to clamp the contact inside the camera mount, I will install a plug. The cap is made of a small piece of electrical tape. Watch carefully, please. I installed a plug. And now the Canon camera sees a dandelion chip and can work with a manual lens. The plug does not interfere with the installation of Canon’s native lenses! The plug does not harm the Canon camera! This method is very simple and reliable! When you buy from me an adapter for a Canon camera with an EF mount of the first generation - write me the name of your camera and I will send you along with the adapter - a small piece of electrical tape that you will make a plug! This method is for Canon cameras: EOS 33V EOS 50E EOS A2 EOS 3 EOS 5 EOS 1N EOS 1V EOS 100 EOS 620 (650) EOS D30 EOS D60 EOS 1DS, 1DS MK II / MK III EOS 1: All models of digital and film.
Buy here: https://www.ebay.com/str/andreykuryanov For direct purchase write me: kuryanchik@gmail.com Direct price 10% lower than on Ebay. Hello, friends. In this video, I will show you how to install a plug in the Canon camera bayonet with the first-generation EF mount, so that the camera sees a dandelion chip and can work with it. 1. Look here. At this point there is a lens indicator lever. If you attach a Canon lens to the camera, this lever moves the petal of the lens mount and clamps the contact inside the Canon camera mount. 2. On adapters for manual lenses, this petal is shorter than necessary. Therefore, the lever inside the camera mount does not pinch the contact. 3.In order for the lever to clamp the contact inside the camera mount, I will install a plug. The cap is made of a small piece of electrical tape. Watch carefully, please. I installed a plug. And now the Canon camera sees a dandelion chip and can work with a manual lens. The plug does not interfere with the installation of Canon’s native lenses! The plug does not harm the Canon camera! This method is very simple and reliable! When you buy from me an adapter for a Canon camera with an EF mount of the first generation - write me the name of your camera and I will send you along with the adapter - a small piece of electrical tape that you will make a plug! This method is for Canon cameras: EOS 33V EOS 50E EOS A2 EOS 3 EOS 5 EOS 1N EOS 1V EOS 100 EOS 620 (650) EOS D30 EOS D60 EOS 1DS, 1DS MK II / MK III EOS 1: All models of digital and film.