Discover the speaker Atlantis Lab AT31 - Tecsart
Tecsart is pleased to present the Atlantis Lab AT31 All the loudspeakers are designed and built in Auvergne using as many local components as possible. Cabinetwork, spikes, terminal blocks, packaging, screws and some capacitors. The rest of the equipment comes from the European Community and in particular from Italy for the hp and capacitors. The specification was to obtain maximum definition and precision, both in terms of sound balance and respect for timbre, at low or very high sound levels. Respect for dynamics throughout the entire bandwidth, with minimum distortion and aggressiveness, was of major importance. The bass is provided by 2 bass drivers, 31 and 26 cm, with paper diaphragms and neodymium magnets, using the same principle as that used on the AT 21 front and rear, in order to get these 2 high-output hp down to very low levels. The 16cm paper midrange reproduces the 250 - 6000hz band. It has the particularity of a very high output (102db/1w/1m), an astonishing power of acceleration in order not to lose any details. It also has a natural musicality that we've managed to preserve after filtering. Specifications : 3-way speaker / 4 HP 2 x Boomers 31 and 1 x 26 cm neodymium paper cone; 1 x Medium 16 cm neodymium paper cone. 1 tweeter 1 inch neodymium polypro membrane. Efficiency: 100db/1w/1m Bandwidth: 30 hz 20 kHz (+/- 1db) Impedance: 4 ohm Power handling: 800w continuous 2000w pulsed Dimensions ( H x D x W ) : 122 x 41 x 41/29
Tecsart is pleased to present the Atlantis Lab AT31 All the loudspeakers are designed and built in Auvergne using as many local components as possible. Cabinetwork, spikes, terminal blocks, packaging, screws and some capacitors. The rest of the equipment comes from the European Community and in particular from Italy for the hp and capacitors. The specification was to obtain maximum definition and precision, both in terms of sound balance and respect for timbre, at low or very high sound levels. Respect for dynamics throughout the entire bandwidth, with minimum distortion and aggressiveness, was of major importance. The bass is provided by 2 bass drivers, 31 and 26 cm, with paper diaphragms and neodymium magnets, using the same principle as that used on the AT 21 front and rear, in order to get these 2 high-output hp down to very low levels. The 16cm paper midrange reproduces the 250 - 6000hz band. It has the particularity of a very high output (102db/1w/1m), an astonishing power of acceleration in order not to lose any details. It also has a natural musicality that we've managed to preserve after filtering. Specifications : 3-way speaker / 4 HP 2 x Boomers 31 and 1 x 26 cm neodymium paper cone; 1 x Medium 16 cm neodymium paper cone. 1 tweeter 1 inch neodymium polypro membrane. Efficiency: 100db/1w/1m Bandwidth: 30 hz 20 kHz (+/- 1db) Impedance: 4 ohm Power handling: 800w continuous 2000w pulsed Dimensions ( H x D x W ) : 122 x 41 x 41/29